Comica Audio BOOMX-D PRO D2 Overview
- Each transmitter is equipped with a built-in microphone and a 3.5mm mic input that accepts the included lavalier microphones.
- For a truly wireless experience, the transmitter can be clipped on clothing without having to wire yourself or your talent. You can also hold the transmitter in your hand and use it as a handheld microphone.
- Each transmitter features 16GB of internal memory, allowing you to record up to 48 hours of audio at a 16-bit/48 kHz sampling rate.
- Recording is activated by a single, easy-to-see button on the transmitter.
- A backup recording can be made at a 6 dB lower volume in case the main recording is too loud in places.
- The On/Off switch doubles as a mute button.
- Adjust the -6 to +6 dB gain or denoise function using the onboard controls.
- This plug-and-play system is easy to use. It comes pre-paired at the factory; connect it to your camera, turn it On, and you’re ready to start recording.
- Dedicated gain buttons on the receiver allow quick and effortless adjustment of the signal level for each microphone independently.
- The receiver and the transmitters have a display that shows signal strength, audio level, mono/stereo configuration, and battery life.
- You have the option to switch between mono or stereo on the receiver: Recording in mono combines both microphones on both the left and right side of your audio track. Recording in stereo puts one person on the left and the other person on the right, allowing you to isolate each person’s dialog and adjust each level individually later in post.
- The transmitters and the receiver are powered via a built-in lithium-ion rechargeable battery. They can also be powered via USB, even while in use, giving you near unlimited operating time.
- Whereas typical analog wireless systems are susceptible to interference from TV and radio waves, the BoomX-D PRO digital system avoids that by operating in the 2.4 GHz frequency band, which occupies frequencies beyond those of television, radio transmissions, and UHF wireless microphone systems.
- The system automatic changes transmission frequency to mitigate noise and dropouts at a line-of-sight distance of up to 328 feet. For optimal performance, environments with limited Wi-Fi/2.4 GHz traffic and minimal physical obstructions are recommended.
- The system operates with less than 20ms of latency for better sound and video sync.
- 3.5mm TRS to TRRS audio cable for smartphone
- 3.5mm TRS to TRS audio cable for use with Canon, Nikon, and similar cameras
- 3.5mm TRS to TRS audio cable with impedance for use with Sony, Panasonic, Fujifilm, and similar cameras
- 3-in-1 charging/output cable—the orange cable can be used for charging and data transmitting, the black cable can only be used for charging
- Hard carry case for travel and storage
Reviews
There are no reviews yet.